Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR(for Front) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0227642 ULTRASONIC SENSOR(for Front) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Front)  REMOVAL  


PROCEDURE

Hide 52119A 1.REMOVE FRONT BUMPER COVER

Hide 89348D 2.REMOVE ULTRASONIC SENSOR CLIP

HINT:
·

The illustration shows the ultrasonic sensor clip for the LH corner and front RH. The horizontal orientation of the ultrasonic sensor clip for the RH corner and front LH is opposite that of the image shown in the illustration.

·

Use the same procedure for all ultrasonic sensor clips.



a.
B421032

Detach the 2 claws and remove the ultrasonic sensor clip as shown in the illustration.


b.

Detach the clamp.


Hide 89341A 3.REMOVE NO. 1 ULTRASONIC SENSOR

a.

Disconnect the 4 connectors.

B437866


b.

Detach the 4 claws and remove the No. 1 ultrasonic sensor as shown in the illustration.

B354819

HINT:
·

The illustration shows the No. 1 ultrasonic sensor for the LH corner and front sensor RH. The horizontal orientation of the No. 1 ultrasonic sensor for the RH corner and front sensor LH is opposite that of the image shown in the illustration.

·

Use the same procedure for all No. 1 ultrasonic sensors.