Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR(for Front) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0227642 ULTRASONIC SENSOR(for Front) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Front)  INSTALLATION  


PROCEDURE

Hide 89341A 1.INSTALL NO. 1 ULTRASONIC SENSOR

a.

Attach the 4 claws to install the No. 1 ultrasonic sensor as shown in the illustration.

B354822

NOTICE:
·
E270085C01
1.969,1.573 2.24,0.24 2.24,0.24 2.719,0.24 false 1.823,2.219 2.083,3.146 2.083,3.146 2.583,3.146 false 2.635,3.052 2.948,3.208 0.313,0.156 10 *a 2.833,0.115 3.146,0.271 0.313,0.156 10 *b
*a No. 1 ultrasonic sensor direction
*b Keyhole direction


The No. 1 ultrasonic sensor direction is the same as the keyhole direction.

·

Do not damage the bumper when inserting the No. 1 ultrasonic sensor.



HINT:
·

The illustration shows the No. 1 ultrasonic sensor for the LH corner and front sensor RH. The horizontal orientation of the No. 1 ultrasonic sensor for the RH corner and front sensor LH is opposite that of the image shown in the illustration.

·

Use the same procedure for all No. 1 ultrasonic sensors.




b.

Connect the 4 connectors.


Hide 89348D 2.INSTALL ULTRASONIC SENSOR CLIP

HINT:
·

The illustration shows the ultrasonic sensor clip for the LH corner and front RH. The horizontal orientation of the ultrasonic sensor clip for the RH corner and front LH is opposite that of the image shown in the illustration.

·

Use the same procedure for all ultrasonic sensor clips.



a.

Attach the clamp.


b.

Attach the 2 claws to install the ultrasonic sensor clip.


Hide 52119A 3.INSTALL FRONT BUMPER COVER