31470
1.INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
Install the clutch release cylinder assembly and No. 1 clutch tube bracket with the 2 bolts.
31482
2.CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
| *A | for LHD |
| *B | for RHD |
Temporarily install the clutch release cylinder to flexible hose tube labeled A.
Connect the clutch release cylinder to flexible hose tube with the 3 bolts.
Using a union nut wrench, tighten the clutch release cylinder to flexible hose tube.
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench. Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.BLEED CLUTCH PIPE LINE
4.CHECK FOR BRAKE FLUID LEAKAGE
74414B
5.INSTALL BATTERY BRACKET REINFORCEMENT