Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
64309A
1.REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)
64910N
2.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
58410B
3.REMOVE DECK BOARD ASSEMBLY (for Compact Spare Tire)
58410B
4.REMOVE DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)
64997
5.REMOVE DECK FLOOR BOX LH
58417H
6.REMOVE REAR NO. 3 FLOOR BOARD
58416K
7.REMOVE REAR NO. 2 FLOOR BOARD
Use the same procedure described for the rear No. 3 floor board side.
58386
8.REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)
64716P
9.REMOVE REAR DECK TRIM COVER (w/ Full Size Spare Tire)
58577E
10.REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Compact Spare Tire)
58577E
11.REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)
12.REMOVE REAR SEAT ASSEMBLY LH
67918E
13.REMOVE REAR DOOR SCUFF PLATE LH
62332C
14.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
73178A
15.REMOVE SEAT BELT ANCHOR COVER CAP
Using a screwdriver, detach the 2 claws and guide to remove the seat belt anchor cover cap.
Tape the screwdriver tip before use.
73370C
16.DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.
Remove the bolt and shoulder anchor of the rear No. 1 seat outer belt assembly LH.
64718A
17.REMOVE DECK TRIM SERVICE HOLE COVER
64740E
18.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
62480A
19.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
73370C
20.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the 2 bolts.
Detach the 2 claws to remove the rear No. 1 seat outer belt assembly LH.
73432
21.REMOVE REAR SEAT BELT RETRACTOR COVER LH
Detach the claw to remove the rear seat belt retractor cover LH.