Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY › 2015.10–2016.08
RM3090E _58 Vehicle Interior _008788 SEAT BELT _0050329 REAR SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 73432 1.INSTALL REAR SEAT BELT RETRACTOR COVER LH

a.

Attach the claw to install the rear seat belt retractor cover LH.


Hide 73370C 2.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.
B334912C01
1.542,1.521 2,1.667 true 1.333,0.333 1.75,0.563 true 1.146,0.208 1.458,0.406 0.313,0.198 10 *1 2.031,1.594 2.344,1.792 0.313,0.198 10 *2
*1 Bolt (A)
*2 Bolt (B)


Align the 2 claws with the seat belt positioning holes, and install the retractor of the rear No. 1 seat outer belt assembly LH with the 2 bolts as shown in the illustration.

Torque:
for bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)
for bolt B : 42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 62480A 3.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

Hide 64740E 4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 64718A 5.INSTALL DECK TRIM SERVICE HOLE COVER

Hide 73370C 6.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.

Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Check that the rear No. 1 seat outer belt assembly LH is not twisted.


c.

Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


d.

Check that the rear No. 1 seat outer belt assembly LH is not twisted.


Hide 73178A 7.INSTALL SEAT BELT ANCHOR COVER CAP

a.

Attach the guide and 2 claws to install the seat belt anchor cover cap.


Hide 62332C 8.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67918E 9.INSTALL REAR DOOR SCUFF PLATE LH

Hide 10.INSTALL REAR SEAT ASSEMBLY LH

Hide 58577E 11.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

Hide 64716P 12.INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)

Hide 58386 13.INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)

Hide 58417H 14.INSTALL REAR NO. 3 FLOOR BOARD

Hide 58416K 15.INSTALL REAR NO. 2 FLOOR BOARD

HINT:

Use the same procedure described for the No. 3 rear floor board side.


Hide 64997 16.INSTALL DECK FLOOR BOX LH

Hide 58410B 17.INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)

Hide 58410B 18.INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)

Hide 64910N 19.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 64309A 20.INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)