Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE) › 2015.10–2016.08
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050031 CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE) A

HEATING / AIR CONDITIONING  CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 52029 3.REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

Hide 16681 4.REMOVE RADIATOR UPPER AIR GUIDE PLATE

Hide 88703 5.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.
E269114

Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.


b.

Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88706 6.DISCONNECT LIQUID PIPE SUB-ASSEMBLY

a.
E261291

Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.


b.

Remove the O-ring from the liquid pipe sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 16533B 7.REMOVE NO. 1 RADIATOR SUPPORT

Hide 16712 8.REMOVE NO. 2 FAN SHROUD

a.

Detach the 3 clamps and disconnect the water by-pass pipe from the No. 2 fan shroud.


b.
E269116

Remove the 2 bolts and No. 2 fan shroud.


Hide 88460 9.REMOVE COOLER CONDENSER ASSEMBLY

a.
E269117

Detach the 2 guides and remove the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the cooler condenser or radiator when removing the cooler condenser assembly.