1.INSPECT COOLING FAN SYSTEM
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Active Test / Control the Engine Cooling Fan Duty Ratio
| Tester Display |
|---|
| Control the Engine Cooling Fan Duty Ratio |
Check the operation of the cooling fans while operating them using the GTS.
| Tester Operation | Fan Operation |
|---|---|
| 100% | Cooling fans operate |
| 0% | Cooling fans stop |
If the cooling fans do not operate, check the cooling fan circuit.
Click hereEngine / Hybrid System>2AD-FTV COOLING>COOLING FAN SYSTEM(w/ Towing Package)>Cooling Fan Circuit