Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › from 2015.10
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050088 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  REMOVAL  


PROCEDURE

Hide 53895B 1.REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER>REMOVAL


Hide 53875A 2.REMOVE FRONT FENDER LINER RH

a.
B427877C01
2.542,0.323 2.771,0.5 0.229,0.177 10 true *a
*a 90°


Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.


b.
B427876

Remove the 2 screws.


c.
B427879

Remove the 4 grommets.


d.
B427878

Remove the 6 clips and front fender liner RH.


Hide 3.DRAIN WASHER FLUID

a.
E268371

Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

HINT:

Use a container to collect the washer fluid.



Hide 85310 4.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E268372

Disconnect the connector and hose.


b.

Pull out the windshield washer motor and pump assembly from the packing of the windshield washer jar assembly.


Hide 52119A 5.REMOVE FRONT BUMPER COVER

Hide 85301 6.REMOVE WASHER INLET SUB-ASSEMBLY

a.
E268373

Remove the clip.


b.

Pull the washer inlet sub-assembly upward to remove it from the windshield washer jar assembly.


Hide 85330 7.REMOVE WINDSHIELD WASHER JAR ASSEMBLY

a.

w/o Headlight Cleaner System:

i.

Detach the 6 clamps.

B427694C01
6.333,0.792 6.552,0.552 true 6.563,0.427 6.781,0.635 0.219,0.208 10 true *a
*a Guid - -
V100135

Bolt
V100136

Connector



ii.

Disconnect the connector.


iii.

Remove the 3 bolts. Then detach guide and remove the windshield washer jar assembly.



b.

w/ Headlight Cleaner System:

i.

Detach the 6 clamps.

E268374C01
6.26,0.896 6.469,0.656 true 6.51,0.542 6.76,0.75 0.25,0.208 10 true *a
*a Guid - -



ii.

Disconnect the 3 connectors.


iii.

Remove the 3 bolts. Then detach guide and remove the windshield washer jar assembly.



Hide 85397 8.REMOVE LEVEL WARNING SWITCH ASSEMBLY

a.
E268377

Pull out the level warning switch assembly in thedirection indicated by arrow in the illustration toremove it.


Hide 85280A 9.REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)

E268375

a.

Remove the headlight cleaner motor and pump assembly.


Hide 85942 10.REMOVE HEADLIGHT CLEANER CONTROL RELAY (w/ Headlight Cleaner System)

E268376

a.

Detach the claw and remove the headlight cleaner control relay.