29300
1.INSTALL VACUUM PUMP ASSEMBLY
| *1 | Oil Pipe |
| *2 | O-Ring |
Apply engine oil to the oil pipe at the tip of the vacuum pump.
Coat 2 new O-rings with engine oil, and install them to the vacuum pump.
Install the vacuum pump so that the coupling teeth of the vacuum pump labeled A and the groove of the camshaft labeled B can engage.
Install 3 new flange bolts.
Connect the 2 vacuum hoses, and slide the clamp to secure it.
2.INSTALL ENGINE WITH TRANSAXLE
for 2AD-FTV:
Click hereEngine / Hybrid System>2AD-FTV ENGINE MECHANICAL>ENGINE ASSEMBLY>INSTALLATION
for 2AD-FHV:
Click hereEngine / Hybrid System>2AD-FHV ENGINE MECHANICAL>ENGINE ASSEMBLY>INSTALLATION
29300
3.INSPECT VACUUM PUMP OPERATION