12611
1.REMOVE NO. 1 ENGINE COVER (for 2WW)
55789D
2.REMOVE NO. 3 COWL TOP PANEL INSULATOR (for 2WW)
3.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf (R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT
88707
4.DISCONNECT AIR CONDITIONING TUBE (except Sub-cool Accelerator)
88707
5.DISCONNECT SUCTION PIPE SUB-ASSEMBLY (for Sub-cool Accelerator)
88515
6.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
| *1 | 6 mm Bolt |
Temporarily install the 6 mm bolt halfway to the cooler expansion valve.
Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.