89467B
1.REMOVE AIR FUEL RATIO SENSOR
for Sensor 1:
Click hereEngine / Hybrid System>2WW ENGINE CONTROL>AIR FUEL RATIO SENSOR(for Sensor 1)>REMOVAL
for Sensor 2:
Click hereEngine / Hybrid System>2WW ENGINE CONTROL>AIR FUEL RATIO SENSOR(for Sensor 2)>REMOVAL
89425
2.REMOVE EXHAUST GAS TEMPERATURE SENSOR
for Sensor 1:
Click hereEngine / Hybrid System>2WW EMISSION CONTROL>EXHAUST GAS TEMPERATURE SENSOR(for Sensor 1)>REMOVAL
for Sensor 2:
Click hereEngine / Hybrid System>2WW EMISSION CONTROL>EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2)>REMOVAL
89481B
3.REMOVE DIFFERENTIAL PRESSURE SENSOR
85110
4.REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
55789D
5.REMOVE NO. 3 COWL TOP PANEL INSULATOR
Remove the 4 nuts and No. 3 cowl top panel insulator.
55701J
6.REMOVE OUTER COWL TOP PANEL
Detach the clamp and disconnect the wire harness from the outer cowl top panel sub-assembly.
Remove the 13 bolts and outer cowl top panel sub-assembly.
87100A
7.REMOVE HEATER AND ACCESSORY ASSEMBLY (w/ Combustion Type Power Heater)
51441
8.REMOVE NO. 1 ENGINE UNDER COVER
50819
9.REMOVE FRONT FLOOR COVER
77641A
10.REMOVE NO. 1 FUEL TANK PROTECTOR
51442
11.REMOVE NO. 2 ENGINE UNDER COVER
17410
12.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Remove the 4 bolts and 4 compression springs and disconnect the front exhaust pipe assembly from the exhaust manifold converter sub-assembly and tail exhaust pipe assembly.
Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.
Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.
17167
13.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Detach the 2 clamps and disconnect the engine wire.
Remove the 2 bolts and No. 1 exhaust manifold heat insulator.
25051
14.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
Remove the 2 bolts, 2 nuts and manifold stay.
Loosen the V-band clamp.
Remove the 3 nuts, 3 bolts, V-band clamp, gasket, engine bracket and exhaust manifold converter sub-assembly.
| *1 | Engine Bracket | *2 | Exhaust Manifold Converter Sub-assembly |
| *3 | No. 2 Manifold Stay | - | - |