1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf (R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT
16361A
2.REMOVE V-RIBBED BELT
for 3ZR-FE: Click hereEngine / Hybrid System>3ZR-FE ENGINE MECHANICAL>DRIVE BELT>REMOVAL
for 3ZR-FAE: Click hereEngine / Hybrid System>3ZR-FAE ENGINE MECHANICAL>DRIVE BELT>REMOVAL
88703
3.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
| *A | for 3ZR-FE |
| *B | for 3ZR-FAE |
Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88704
4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
| *A | for 3ZR-FE |
| *B | for 3ZR-FAE |
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88310
5.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY
| *A | for 3ZR-FE |
| *B | for 3ZR-FAE |
Disconnect the connector.
for 3ZR-FAE:
Detach the harness clamp.
| *A | for 3ZR-FE |
| *B | for 3ZR-FAE |
Remove the 2 bolts and 2 nuts.
Using an E8 "TORX" socket wrench, remove the 2 stud bolts.
Remove the compressor assembly with pulley.