Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2016.08
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050105 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  DISASSEMBLY  


PROCEDURE

Hide 89348D 1.REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

Hide 89341B 2.REMOVE NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 3.REMOVE BACK-UP LIGHT ASSEMBLY LH

Hide 4.REMOVE BACK-UP LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 891B2 5.REMOVE KICK DOOR CONTROL SENSOR (w/ Touchless Power Back Door)

Hide 82182 6.REMOVE NO. 2 LUGGAGE ROOM WIRE

a.

Detach the 6 clamps and remove the No. 2 luggage room wire.

B452069


Hide 52453 7.REMOVE REAR BUMPER CENTER GUARD

a.
B426432

Remove the 8 clips.


b.

Detach the 4 claws and remove the rear bumper center guard.


Hide 52162H 8.REMOVE REAR BUMPER SIDE EXTENSION LH

a.
B426433

Remove the 2 clips and rear bumper side extension LH.


Hide 52161E 9.REMOVE REAR BUMPER SIDE EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 52169C 10.REMOVE REAR BUMPER LOWER COVER

a.
B426435

Remove the 4 clips.


b.

Detach the 14 claws and 3 guides and remove the rear bumper lower cover.