Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
73432
1.INSTALL REAR SEAT BELT RETRACTOR COVER LH
Attach the claw to install the rear seat belt retractor cover LH.
73370C
2.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
| *1 | Bolt (A) |
| *2 | Bolt (B) |
Align the 2 claws with the seat belt positioning holes, and install the retractor of the rear No. 1 seat outer belt assembly LH with the 2 bolts as shown in the illustration.
62480A
3.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
64740E
4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
64718A
5.INSTALL DECK TRIM SERVICE HOLE COVER
73370C
6.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.
Check that the rear No. 1 seat outer belt assembly LH is not twisted.
73178A
7.INSTALL SEAT BELT ANCHOR COVER CAP
Attach the guide and 2 claws to install the seat belt anchor cover cap.
62332C
8.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
67918E
9.INSTALL REAR DOOR SCUFF PLATE LH
10.INSTALL REAR SEAT ASSEMBLY LH
58577E
11.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE
64716P
12.INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)
58386
13.INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)
58417H
14.INSTALL REAR NO. 3 FLOOR BOARD
58416K
15.INSTALL REAR NO. 2 FLOOR BOARD
Use the same procedure described for the No. 3 rear floor board side.
64997
16.INSTALL DECK FLOOR BOX LH
58410B
17.INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)
58410B
18.INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)
64910N
19.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64309A
20.INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)