Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › from 2016.08
RM3090E _58 Vehicle Interior _008433 SEAT _0058015 SEAT MEMORY SWITCH A

SEAT  SEAT MEMORY SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 67492A 3.REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH

Hide 4.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

Hide 74642A 5.REMOVE FRONT DOOR ASSIST GRIP COVER LH

Hide 69284C 6.REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

Hide 67602 7.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 84927 8.REMOVE SEAT MEMORY SWITCH

B341329

a.

Detach the 4 claws to remove the seat memory switch.