Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84070
1.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY
Install the position control ECU and switch assembly with the 3 screws.
84921A
2.INSTALL RECLINING POWER SEAT SWITCH KNOB
84921B
3.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
71812D
4.INSTALL FRONT SEAT CUSHION SHIELD LH
71868A
5.INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH
6.INSTALL FRONT SEAT ASSEMBLY LH
7.INSPECT FRONT POWER SEAT CONTROL SYSTEM