Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat)
RM3090E _58 Vehicle Interior _008433 SEAT _0049774 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY LH

a.

Place the front seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B340379C01
1.906,0.708 2.219,0.5 true 1.896,1.417 2.833,1.677 true 2.229,0.385 2.542,0.542 0.313,0.156 10 *A 2.865,1.604 3.177,1.76 0.313,0.156 10 *B
*A w/ Seat Heater System
*B w/ Front Seat Side Airbag


Attach the clamps to connect the connector of the front seat inner belt assembly LH.


c.

w/ Front Seat Side Airbag:

Connect the connector of the front seat airbag assembly LH.


d.

w/ Seat Heater System:

Connect the connector of the seat heater.


e.

Temporarily install the front seat assembly with the 4 bolts.


f.

Connect the cable to the negative (-) battery terminal.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



g.

Operate the front power seat switch (slide switch) to move the seat to the rearmost position.


h.
B340376

Tighten the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


i.

Operate the front power seat switch (slide switch) to move the seat to the foremost position.


j.
B340375

Tighten the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


k.

During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat mounting bolts to adjust the adjuster position.


Hide 72138 2.INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

a.
B340372C01
2.438,1.531 2.438,1.583 false
V100135

First
V100136

Second


Attach the 2 claws to install the rear outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72158 3.INSTALL REAR INNER SEAT TRACK BRACKET COVER LH

a.
B340374C01
1.583,0.49 1.521,0.5 false
V100135

First
V100136

Second


Attach the 2 claws to install the rear inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72124 4.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH

a.

Operate the front power seat switch (slide switch) to move the seat to the rearmost position.


b.
B340368C01
1.813,0.708 1.792,0.729 false
V100135

First
V100136

Second


Attach the 2 claws to install the front outer seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 72128A 5.INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH

a.
B340370C01
1.813,0.698 1.833,0.708 false
V100135

First
V100136

Second


Attach the 2 claws to install the front inner seat track bracket cover LH as indicated by the arrows in the order shown in the illustration.


Hide 71910A 6.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.


Hide 8.INSPECT FRONT POWER SEAT CONTROL SYSTEM

Hide 9.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)