Home › Engine / Hybrid System › 2AR-FE COOLING › WATER PUMP › from 2016.08
RM3090E _51 Engine / Hybrid System _008400 2AR-FE COOLING _0046903 WATER PUMP A

2AR-FE COOLING  WATER PUMP  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 51441 2.REMOVE NO. 1 ENGINE UNDER COVER

Hide 16634D 5.REMOVE DUST COVER (w/ Cover)

a.
A390134C02
1.448,1.271 2,1.656 true 2,1.646 2.24,1.844 0.24,0.198 10 true *a
*a Protective Tape


Using a screwdriver, remove the dust cover.

HINT:

Tape the screwdriver tip before use.



Hide 16620 6.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

A391931C01
0,0 0.292,0.219 0.292,0.219 10 true *A 0.031,2.542 0.271,2.76 0.24,0.219 10 true *B
*A w/ Cover
*B w/o Cover


a.

Remove the bolt and V-ribbed belt tensioner assembly.


Hide 16100 7.REMOVE ENGINE WATER PUMP ASSEMBLY

a.
A194903

Detach the clamp of the wire harness from the wire harness bracket.


b.

Remove the bolt and wire harness bracket.


c.
A194904

Remove the 7 bolts, engine water pump assembly and water pump gasket.