Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (for HV Model with Occupant Classification System) › 2018.10–2020.08
RM3620E _58 Vehicle Interior _076036 SUPPLEMENTAL RESTRAINT SYSTEMS _0369991 AIRBAG SYSTEM(for HV Model with Occupant Classification System) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(for HV Model with Occupant Classification System)  B1635  Curtain Shield Airbag Sensor (LH)  B1637  Curtain Shield Airbag Sensor Lost Communication (LH)  


DESCRIPTION

The side collision sensor LH circuit consists of the airbag sensor assembly, side airbag pressure sensor LH and No. 2 side airbag sensor assembly LH.

The No. 2 side airbag sensor assembly LH detects impacts to the vehicle and send signals to the airbag sensor assembly to determine if the SRS should be deployed.

These DTCs are stored when a malfunction is detected in the No. 2 side airbag sensor assembly LH or airbag sensor assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B1635 Curtain Shield Airbag Sensor (LH) Either condition is met:
·

A No. 2 side airbag sensor assembly LH malfunction.

·

An airbag sensor assembly malfunction.


·

No. 2 side airbag sensor assembly LH

·

Airbag sensor assembly


Comes on Not applicable
B1637 Curtain Shield Airbag Sensor Lost Communication (LH) Either condition is met:
·

A No. 2 side airbag sensor assembly LH malfunction.

·

An airbag sensor assembly malfunction.


·

No. 2 side airbag sensor assembly LH

·

Airbag sensor assembly


Comes on Not applicable

WIRING DIAGRAM

C401868E37
5.375,2.083 7.01,2.323 1.635,0.24 10 false Airbag Sensor Assembly 5.375,1.927 6.208,2.125 0.833,0.198 10 false N21 5.677,0.875 6.51,1.073 0.833,0.198 10 false BBL+ 5.698,1.458 6.531,1.656 0.833,0.198 10 false BBL- 5.406,0.76 6.24,0.958 0.833,0.198 10 false 32 5.406,1.365 6.24,1.563 0.833,0.198 10 false 31 1.615,0.75 2.448,0.948 0.833,0.198 10 false 4 1.625,1.354 2.458,1.552 0.833,0.198 10 false 3 1.146,0.854 1.979,1.052 0.833,0.198 10 false BCL+ 1.146,1.438 1.979,1.635 0.833,0.198 10 false BCL- 1.135,2.792 1.969,2.99 0.833,0.198 10 false BDL+ 1.146,3.333 1.979,3.531 0.833,0.198 10 false BDL- 1.604,2.688 2.438,2.885 0.833,0.198 10 false 1 1.594,3.24 2.427,3.438 0.833,0.198 10 false 2 4.083,2.813 4.917,3.01 0.833,0.198 10 false BDL+ 4.094,3.354 4.927,3.552 0.833,0.198 10 false BDL- 0.552,3.969 2.177,4.354 1.625,0.385 10 false No. 2 Side Airbag Sensor Assembly LH 0.542,3.813 1.302,4.146 0.76,0.333 10 false N22 4.01,3.979 6.094,4.188 2.083,0.208 10 false Side Airbag Pressure Sensor LH 4.021,3.823 4.781,4.156 0.76,0.333 10 false J9 2.698,3.344 3.458,3.677 0.76,0.333 10 false JN2 2.708,2.813 3.469,3.146 0.76,0.333 10 false JN2 2.781,3.156 3.615,3.354 0.833,0.198 10 false 2 2.781,2.594 3.615,2.792 0.833,0.198 10 false 1 3.906,2.719 4.74,2.917 0.833,0.198 10 false 2 3.906,3.26 4.74,3.458 0.833,0.198 10 false 1 2.698,2.99 3.531,3.188 0.833,0.198 10 false BDL+ 2.688,3.563 3.521,3.76 0.833,0.198 10 false BDL-

CAUTION / NOTICE / HINT

NOTICE:
·

When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

After replacing the airbag sensor assembly, refer to initialization.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



PROCEDURE

1.CHECK NO. 2 SIDE AIRBAG SENSOR ASSEMBLY LH
a.
C370762C24
0.875,0.938 1.188,1.135 0.313,0.198 10 false *1 2.406,1.313 2.719,1.51 0.313,0.198 10 false *2
*1 No. 2 Side Airbag Sensor Assembly RH
*2 Airbag Sensor Assembly


Turn the power switch off.


b.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


c.

Interchange the No. 2 side airbag sensor assembly LH with RH and connect the connectors to them.


d.

Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.


e.

Turn the power switch on (IG), and wait for at least 60 seconds.


f.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for HV Model with Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

g.

Turn the power switch off.


h.

Turn the power switch on (IG), and wait for at least 60 seconds.


i.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for HV Model with Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Proceed to
DTC B1635 or B1637 is output
DTC B1630 or B1632 is output
DTCs B1630, B1632, B1635 and B1637 are not output


HINT:

Codes other than DTC B1630, B1632, B1635 and B1637 may be output at this time, but they are not related to this check.



j.

Turn the power switch off.


k.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


l.

Return the No. 2 side airbag sensor assembly RH and LH to their original positions and connect the connectors to them.



DTC B1635 or B1637 is output

DTC B1630 or B1632 is output

REPLACE NO. 2 SIDE AIRBAG SENSOR ASSEMBLY LH

DTCs B1630, B1632, B1635 and B1637 are not output