55405B
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Type A)
55422C
2.REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
3.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)
Remove the 4 bolts.
|
Remove in this Direction |
Detach the clip and remove the radio and display receiver assembly with bracket.
Disconnect each connector.
4.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)
for Type A:
Remove the 4 bolts.
|
Remove in this Direction |
Detach the clip and remove the radio receiver assembly with bracket.
Disconnect each connector.
for Type B:
Remove the 4 bolts.
|
Remove in this Direction |
Detach the clip and remove the radio receiver assembly with bracket.
Disconnect each connector.
86211J
5.REMOVE NO. 1 RADIO RECEIVER BRACKET
for Type A:
Remove the 3 screws and No. 1 radio receiver bracket.
for Type B:
Remove the 2 screws and No. 1 radio receiver bracket.
86212C
6.REMOVE NO. 2 RADIO RECEIVER BRACKET
for Type A:
Remove the 3 screws and No. 2 radio receiver bracket.
for Type B:
Remove the 2 screws and No. 2 radio receiver bracket.