Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
83100
1.INSTALL COMBINATION METER ASSEMBLY
| *A | for 4.2 Inch Display |
| *B | for 7 Inch Display |
Connect the 2 connectors and attach the clamp.
|
Install in this Direction |
Attach the guide and clip to install the combination meter assembly.
Install the 4 screws in the order shown in the illustration.
55410C
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55474B
3.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH