Use the same procedure as for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
85535B
1.INSTALL NO. 1 POWER OUTLET SOCKET COVER
85530
2.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
55524A
3.INSTALL SWITCH BASE HOLE COVER (w/o Radio Receiver)
except Manual Transaxle:
|
Install in this Direction |
Attach the claw to install the switch base hole cover in the direction indicated by the arrow shown in the illustration.
for Manual Transaxle:
|
Install in this Direction |
Attach the claw to install the switch base hole cover in the direction indicated by the arrow shown in the illustration.
86190C
4.INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (w/ Radio Receiver)
58808
5.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY
except Manual Transaxle:
Attach the claw and guide to install the shifting hole cover sub-assembly.
for Manual Transaxle:
Attach the claw and guide to install the shifting hole cover sub-assembly.
84010D
6.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
84390A
7.INSTALL BRAKE WARNING SWITCH ASSEMBLY (for Manual Transaxle)
35978
8.INSTALL SHIFT POSITION INDICATOR (except Manual Transaxle)
for Automatic Transaxle:
for CVT:
K120: Click hereDrivetrain>K120 (MULTIDRIVE / CVT)>SHIFT LEVER>REASSEMBLY
K120F: Click hereDrivetrain>K120F (MULTIDRIVE / CVT)>SHIFT LEVER>REASSEMBLY
for HV Model:
58911B
9.INSTALL NO. 1 BOX PANEL (for RHD)
|
Install in this Direction |
Attach the claw in direction indicated by the arrow shown in the illustration.
Attach the claw to install the No. 1 box panel.
for Manual Transaxle:
Attach the clip.
58911B
10.INSTALL NO. 1 BOX PANEL (for LHD)
|
Install in this Direction |
Attach the claw in direction indicated by the arrow shown in the illustration.
Attach the claw to install the No. 1 box panel.
58985
11.INSTALL CONSOLE BOX RETAINER (for Manual Transaxle)
Attach the claw to install the console box retainer.
58985
12.INSTALL CONSOLE BOX RETAINER (except Manual Transaxle)
Attach the claw to install the console box retainer.
58912D
13.INSTALL NO. 2 BOX PANEL (for RHD)
|
Install in this Direction |
Attach the claw in direction indicated by the arrow shown in the illustration.
except Manual Transaxle:
Attach the claw to install the No. 2 box panel.
Attach the clip.
for Manual Transaxle:
Attach the claw to install the No. 2 box panel.
58912D
14.INSTALL NO. 2 BOX PANEL (for LHD)
|
Install in this Direction |
Attach the claw in direction indicated by the arrow shown in the illustration.
except manual Transaxle:
Attach the claw to install the No. 2 box panel.
for Manual Transaxle:
Attach the claw to install the No. 2 box panel.
Attach the clip.
58987A
15.INSTALL NO. 2 CONSOLE BOX RETAINER (for Manual Transaxle)
Attach the claw to install the No. 2 console box retainer.
58920A
16.INSTALL REAR CONSOLE ARMREST ASSEMBLY
Install the rear console armrest assembly.
Install the console box spacer into the console box mounting bracket spring.
Set the console box spacer and console box mounting bracket spring.
|
Install in this Direction |
Insert in the direction of the arrow shown in the illustration to install the console compartment door stopper pin.
The console compartment door stopper pin can be inserted from either the right or left sides.
Install a new E-ring.
When installing, reinstallation is not required.
Open the rear console armrest assembly.
Attach the guide to install the console box mounting bracket spring both side.
Close the rear console armrest assembly.