Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
RM3620E _58 Vehicle Interior _076046 DOOR LOCK _0370165 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)  OPERATION CHECK  


NOTICE:

Make sure that the vehicle is in an area that allows the wireless control function to operate.


HINT:
·

The switches described in this text are the switches for transmitting signals. The switches are built into the door control transmitter module set sub-assembly.

·

All the functions listed below must be checked in comparison with the wireless door lock control operation area.



CHECK CUSTOMIZE PARAMETERS


a.

The operation check below is based on the non-customized initial condition of the vehicle.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)>CUSTOMIZE PARAMETERS



CHECK BASIC FUNCTIONS


a.

Check that all of the doors lock when the lock switch is pressed.


b.

Check that all of the doors unlock when the unlock switch is pressed.*1


c.

Check that the driver door unlocks when the unlock switch is pressed once, and all of the doors unlock when pressed twice within 3 seconds.*2

*1: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "OFF".

*2: Customize item "Unlock 2 Operation" or "Remote 2-Press Unlock" is set to "ON".




CHECK THE CHATTERING PREVENTION FUNCTION


a.

Press and hold the lock or unlock switch on the door control transmitter module set sub-assembly and check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. Then press the switch repeatedly at 1-second intervals, and check that the corresponding operation is carried out.



CHECK THE SWITCH OPERATION FAIL-SAFE FUNCTION


a.

Check that the doors cannot be locked/unlocked when operating a switch on an unregistered door control transmitter module set sub-assembly, but the doors can be locked/unlocked by operating a switch on a registered door control transmitter module set sub-assembly.


b.

Check that the doors cannot be locked/unlocked when a switch is operated with the key inserted into the ignition key cylinder. This does not apply when registering the identification code.



CHECK THE AUTOMATIC LOCKING FUNCTION


a.

Check that the doors lock automatically if none of the doors have been opened or all of the doors have not been locked within approximately 30 seconds of all of the doors being unlocked by pressing the unlock switch.


b.

Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.


c.

Check that the automatic locking function does not operate when all of the doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30 seconds of unlocking the doors by pressing the unlock switch.



CHECK THE ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION


a.

When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all of the doors.


b.

When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all of the doors.



CHECK THE DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR


HINT:

The doors can be unlocked even when a door is open or ajar.


a.

With a door open or ajar, check that the doors cannot be locked by operating the lock switch.



CHECK THE ILLUMINATED ENTRY FUNCTION


Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK


CHECK THE POWER WINDOW OPERATION FUNCTION


Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>OPERATION CHECK