Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)
RM3620E _56 Audio / Visual / Telematics _076047 AUDIO / VIDEO _0370279 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  CD cannot be Inserted / Played or CD is Ejected Right After Insertion  


PROCEDURE

1.CHECK IF A PROPER CD IS INSERTED
a.

Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

CD is normal.


HINT:
·

Translucent or uniquely-shaped CDs cannot be played.

·

CDs with adhesive paper labels should not be played.

·

Commercial audio CDs can be played.

·

CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

For details on playable CDs, refer to the Owner's Manual.




Result:
Proceed to
OK
NG



OK

2.CHECK THAT CD IS INSERTED PROPERLY

NG

END (CD IS DEFECTIVE)

2.CHECK THAT CD IS INSERTED PROPERLY
a.

Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.



Result:
Proceed to
OK
NG



OK

3.CLEAN CD AND RECHECK

NG

SET CD PROPERLY

3.CLEAN CD AND RECHECK
a.
I100151

Disc cleaning.

i.

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or antistatic preservative.




Result:
Proceed to
OK
NG



OK

END (CD IS DIRTY)

NG

4.REPLACE CD AND RECHECK
4.REPLACE CD AND RECHECK
a.

Replace the CD with a new or known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (CD IS DEFECTIVE)

NG

REPLACE RADIO RECEIVER ASSEMBLY