Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for HV Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0370336 CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for HV Model)  P160700  Cruise Control Input Processor  


DESCRIPTION

The hybrid vehicle control ECU assembly continuously monitors its main and sub CPUs. This self-check ensures that the hybrid vehicle control ECU assembly is functioning properly. If outputs from the CPUs are different and deviate from the standard, the hybrid vehicle control ECU assembly store the DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area
P160700 Cruise Control Input Processor When prohibited by the sub-CPU, the cruise control system operates for 0.3 seconds or more. Hybrid vehicle control ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the hybrid vehicle control ECU assembly refer to Service Bulletin.


HINT:

The hybrid vehicle control ECU assembly receives signals from each sensor to control all functions of the cruise control system. When a DTC is detected, the fail-safe function remains on until the power switch is off.


PROCEDURE

1.CHECK FOR DTCs (CRUISE CONTROL SYSTEM)
a.

Clear the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM (for HV Model)>DTC CHECK / CLEAR

Powertrain > Cruise Control > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the malfunction cannot be detected.



c.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM (for HV Model)>DTC CHECK / CLEAR

Powertrain > Cruise Control > Trouble Codes
50001 399

Result:
Result Proceed to
DTC P160700 is not output A
DTC P160700 is output B



A

B

REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY