Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for HV Model) › 2018.10–2019.02
RM3620E _58 Vehicle Interior _076130 HEATING / AIR CONDITIONING _0370842 AIR CONDITIONING SYSTEM(for HV Model) Y

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for HV Model)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use the following procedure to troubleshoot the air conditioning system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, in order to check the problem symptoms accurately and judge correctly, avoid having any preconceptions. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:

What Vehicle model, system name
When Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
Where Whether the problem occurs at specified place
Under what conditions? Whether the doors were locked or unlocked, whether the power switch was on (IG), whether the engine was running
How did it happen? Ask the customer for details about the vehicle operating conditions, environment and malfunction



Result:
Proceed to
NEXT



NEXT

3.INSPECT AUXILIARY BATTERY VOLTAGE
3.INSPECT AUXILIARY BATTERY VOLTAGE
a.

Inspect the auxiliary battery voltage with the power switch off.

Standard voltage:

11 to 14 V


HINT:

A simple method to determine whether the auxiliary battery is depleted is to operate the horn.


If the auxiliary voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


d.

Using the GTS, check the Data List item "Operation Limitation Control History Count".

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for HV Model)>DATA LIST / ACTIVE TEST

Body Electrical > Air Conditioner > Data List
Tester Display
Operation Limitation Control History Count (Level1)
Operation Limitation Control History Count (Level2)
50003 121 232,233
HINT:

If a value other than zero is displayed for "Operation Limitation Control History Count (Level1)" or "Operation Limitation Control History Count (Level2)", air conditioning system operation may have been limited in the past. If the operation is still limited, the message "High Power Consumption Partial Limit on AC/Heater Operation" will be displayed on the multi-information display in the combination meter assembly. In this case, inspect the charging system.

Click herePower Source / Network>A25A-FXS (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION



Result:
Proceed to
NEXT



NEXT

4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

Result:
Result Proceed to
CAN communication system DTCs are not output A
CAN communication system DTCs are output B



A

5.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

B

5.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Using the GTS, check for LIN communication system DTCs.

Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>DTC CHECK / CLEAR


Result:
Result Proceed to
LIN communication system DTCs are not output A
LIN communication system DTCs are output B



A

6.CHECK FOR DTC* (HYBRID CONTROL SYSTEM)

B

6.CHECK FOR DTC* (HYBRID CONTROL SYSTEM)
a.

Check for DTCs and note any codes that are output.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY)>DTC CHECK / CLEAR

Powertrain > Hybrid Control > Trouble Codes
50001 397


c.

Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY)>DTC CHECK / CLEAR

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

7.CHECK FOR DTC*

B

7.CHECK FOR DTC*
a.

Check for DTCs and note any codes that are output.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for HV Model)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

b.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for HV Model)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

c.

Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for HV Model)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

8.CHECK AIR CONDITIONING CONTROL ASSEMBLY

B

8.CHECK AIR CONDITIONING CONTROL ASSEMBLY
a.

Operate each switch on the air conditioning control assembly to check that the air conditioning system operates normally.


Result:
Result Proceed to
Air conditioning system operates normally A
Air conditioning system does not operate normally B



A

9.CHECK BLOWER FUNCTION

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

9.CHECK BLOWER FUNCTION
a.

Operate the blower switch on the air conditioning control assembly to check that the blower function is controlled normally.


Result:
Result Proceed to
Blower function is controlled normally A
Blower function is not controlled normally B



A

10.CHECK FRESH/RECIRCULATION CONTROL FUNCTION

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

10.CHECK FRESH/RECIRCULATION CONTROL FUNCTION
a.

Operate the blower switch on the air conditioning control assembly to check that the fresh/recirculation control function is controlled normally.


Result:
Result Proceed to
Fresh/recirculation control function is controlled normally A
Fresh/recirculation control function is not controlled normally B



A

11.CHECK AIR OUTLET CHANGING FUNCTION

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

11.CHECK AIR OUTLET CHANGING FUNCTION
a.

Operate the MODE switch on the air conditioning control assembly to check that the air outlet changing function is controlled normally.


Result:
Result Proceed to
Air outlet changing function is controlled normally A
Air outlet changing function is not controlled normally B



A

12.CHECK COOL AIR FUNCTION

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

12.CHECK COOL AIR FUNCTION
a.

Operate the A/C switch and temperature adjustment switch on the air conditioning control assembly to check that the cooling performance is controlled normally.


Result:
Result Proceed to
Cooling performance is controlled normally A
Cooling performance is not controlled normally B



A

13.CHECK HEATER FUNCTION

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

13.CHECK HEATER FUNCTION
a.

Operate the A/C switch and temperature adjustment switch on the air conditioning control assembly to check that the heating performance is controlled normally.


Result:
Result Proceed to
Heating performance is controlled normally A
Heating performance is not controlled normally B



A

14.USE SIMULATION METHOD TO CHECK

B

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH VEHICLE CHECK ITEMS

14.USE SIMULATION METHOD TO CHECK

NEXT

15.CONFIRMATION TEST
15.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END