The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during parking assist ECU removal/installation are shown below.
58810J
1.REMOVE CONSOLE BOX ASSEMBLY
58996A
2.REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET
Remove the 4 bolts.
Detach the guide and remove the No. 2 console box mounting bracket.
Disconnect the 2 connectors.
Detach the wire harness clamp.
86792C
3.REMOVE PARKING ASSIST ECU
Remove the 2 nuts and parking assist ECU.