Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE UNIT
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0371322 MANUAL TRANSAXLE UNIT A

EG62 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE UNIT  DISASSEMBLY  


PROCEDURE

Hide 1.SECURE MANUAL TRANSAXLE ASSEMBLY

a.
C396215C01
2.479,1.958 2.813,1.958 false 0.646,1.99 0.979,1.99 false 0.49,1.885 0.802,2.042 0.313,0.156 10 false *a 2.833,1.854 3.146,2.01 0.313,0.156 10 false *a
*a Wooden Block


Place the manual transaxle assembly on wooden blocks.


Hide 33101A 2.REMOVE MANUAL TRANSMISSION FILLER PLUG

a.
C396216

Remove the manual transmission filler plug and gasket from the manual transmission case.


Hide 33101B 3.REMOVE MANUAL TRANSMISSION DRAIN PLUG

a.
C396217

Remove the manual transmission drain plug and gasket from the manual transmission case.


Hide 84210 4.REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

Hide 89413B 6.REMOVE TRANSMISSION REVOLUTION SENSOR

Hide 31478 7.REMOVE RELEASE CYLINDER BLEEDER PLUG CAP

a.
C396221

Remove the release cylinder bleeder plug cap from the release cylinder bleeder plug.


Hide 8.REMOVE RELEASE CYLINDER BLEEDER PLUG

a.
C396222

Remove the release cylinder bleeder plug from the clutch release bleeder sub-assembly.


Hide 31400 9.REMOVE CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY

Hide 31482F 10.REMOVE CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY TO BLEEDER TUBE

Hide 31407B 11.REMOVE CLUTCH RELEASE BLEEDER SUB-ASSEMBLY

Hide 33292A 12.REMOVE LOCK BALL PIN

a.
C396223C01
0.188,1.031 0.188,0.813 true 0.427,1.021 0.427,0.729 true 1.021,1.135 0.698,0.75 true 0.115,1.052 0.427,1.208 0.313,0.156 10 false *1 0.365,1.052 0.677,1.208 0.313,0.156 10 false *2 1.052,1.052 1.365,1.208 0.313,0.156 10 false *3
*1 Shift and Select Lever Shaft Straight Screw with Head Plug
*2 No. 2 Lock Ball Pin Return Spring
*3 Lock Ball Pin


Using a 10 mm hexagon socket wrench, remove the shift and select lever shaft straight screw with head plug from the manual transmission case.


b.

Using a Magnet Hand, remove the No. 2 lock ball pin return spring and lock ball pin from the manual transmission case.


Hide 33292B 13.REMOVE NO. 2 LOCK BALL PIN

a.
C396224C01
0.208,1.396 0.208,1.156 true 0.552,1.427 0.552,1.042 true 1.073,1.406 0.885,1.063 true 0.167,1.406 0.479,1.563 0.313,0.156 10 false *1 0.5,1.427 0.813,1.583 0.313,0.156 10 false *2 1.021,1.417 1.333,1.573 0.313,0.156 10 false *3
*1 Shift and Select Lever Shaft Straight Screw with Head Plug
*2 No. 1 Lock Ball Pin Return Spring
*3 No. 2 Lock Ball Pin


Using a 10 mm hexagon socket wrench, remove the shift and select lever shaft straight screw with head plug from the transaxle(MTM) case sub-assembly.


b.

Using a Magnet Hand, remove the No. 1 lock ball pin return spring and No. 2 lock ball pin from the transaxle(MTM) case sub-assembly.


Hide 33275C 14.REMOVE SHIFT DETENT BALL

a.
C396225C01
0.26,1.063 0.26,0.729 true 0.688,1.052 0.688,0.708 true 1.167,1.073 1.167,0.708 true 0.219,1.083 0.531,1.24 0.313,0.156 10 false *1 0.625,1.094 0.938,1.25 0.313,0.156 10 false *2 1.104,1.094 1.417,1.25 0.313,0.156 10 false *3
*1 Shift Detent Ball Plug
*2 No. 2 Shift Detent Ball Compression Spring
*3 Shift Detent Ball


Using a 6 mm hexagon socket wrench, remove the shift detent ball plug from the transaxle(MTM) case sub-assembly.


b.

Using a Magnet Hand, remove the No. 2 shift detent ball compression spring and shift detent ball from the transaxle(MTM) case sub-assembly.


c.
C396226C01
0.26,1.5 0.26,1.313 true 0.531,1.479 0.531,1.292 true 0.896,1.479 0.771,1.26 true 2.406,0.854 2.406,0.667 true 2.719,0.865 2.719,0.615 true 3.063,0.854 2.948,0.625 true 0.188,1.5 0.396,1.646 0.208,0.146 10 true *1 2.656,0.865 2.969,1.021 0.313,0.156 10 false *2 0.854,1.51 1.167,1.667 0.313,0.156 10 false *3 0.49,1.51 0.802,1.667 0.313,0.156 10 false *2 2.344,0.854 2.552,1 0.208,0.146 10 false *1 3.021,0.865 3.333,1.021 0.313,0.156 10 false *3
*1 Shift Detent Ball Plug
*2 Shift Detent Ball Compression Spring
*3 Shift Detent Ball


Using a 6 mm hexagon socket wrench, remove the 2 shift detent ball plugs from the manual transmission case.


d.

Using a Magnet Hand, remove the 2 shift detent ball compression springs and 2 shift detent balls from the manual transmission case.


Hide 33111 15.REMOVE MANUAL TRANSMISSION CASE

a.
C396227

Remove the 18 bolts.


b.
C396228

Using a plastic-faced hammer, separate the manual transmission case from the transaxle(MTM) case sub-assembly.

NOTICE:

Do not damage the manual transmission case.



c.
C396229C01
2.844,1.438 3.052,1.073 false 3.083,0.938 3.396,1.094 0.313,0.156 10 false *1 3.208,2.021 3.396,2.24 0.188,0.219 10 false *a
*1 Outer No. 1 Shift Lever
*a Turn Counterclockwise


While turning the outer No. 1 shift lever counterclockwise, remove the manual transmission case from the transaxle (MTM) case sub-assembly as shown in the illustration.

NOTICE:
C400536C01
0.833,1.344 1.24,1.344 1.24,1.344 1.448,2.104 true 1.625,4.125 2.219,4.125 true 2.667,4.083 2.823,3.708 2.823,3.708 2.958,3.708 true 2.979,3.615 3.292,3.771 0.313,0.156 10 false *1 1.469,4.031 1.781,4.188 0.313,0.156 10 false *2 0.656,1.25 0.969,1.406 0.313,0.156 10 false *3 1.948,0.135 2.229,0.354 0.281,0.219 10 false *a
*1 Inner No. 1 Shift Lever
*2 Inner No. 2 Shift Lever
*3 Outer No. 1 Shift Lever
*a Movement Inside Manual Transaxle Assembly


As the outer No. 1 shift lever will turn clockwise strongly under its own weight when the manual transmission case is lifted a certain amount and the inner No. 1 shift lever and inner No. 2 shift lever become disengaged, make sure to hold the outer No. 1 shift lever firmly.



Hide 33256A 16.REMOVE INNER SELECT LEVER SET BOLT

a.
C396230

Using a 6 mm hexagon socket wrench, remove the inner select lever set bolt.


Hide 33257 17.REMOVE OUTER SELECT LEVER

a.
C396231

Remove the outer select lever from the transaxle(MTM) case sub-assembly.


Hide 18.REMOVE SHIFT AND SELECT LEVER SHAFT ASSEMBLY

a.
C396232

Rotate the shift and select lever shaft assembly counterclockwise to the position shown in the illustration and remove it from the transaxle (MTM) case sub-assembly.


Hide 33256 19.REMOVE INNER SELECT LEVER

a.
C396233

Remove the inner select lever from the transaxle(MTM) case sub-assembly.


Hide 33257C 20.REMOVE OUTER SELECT LEVER OIL SEAL

a.
C396234C01
0.917,1.917 1.344,1.104 true 0.813,1.906 1.125,2.063 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the outer select lever oil seal from the transaxle(MTM) case sub-assembly.

NOTICE:

Do not damage the transaxle(MTM) case sub-assembly.



Hide 21.REMOVE INPUT SHAFT ASSEMBLY

a.
C396235C01
2.292,0.469 2.708,0.469 false 0.99,0.323 1.406,0.323 false 1.021,0.875 1.438,0.875 false 1.615,0.917 2.5,0.917 true 1.792,1.333 2.677,1.333 true 2.76,0.385 3.073,0.542 0.313,0.156 10 false *1 0.833,0.24 1.146,0.396 0.313,0.156 10 false *2 0.854,0.792 1.167,0.948 0.313,0.156 10 false *3 2.542,0.823 2.854,0.979 0.313,0.156 10 false *4 2.708,1.24 3.021,1.396 0.313,0.156 10 false *5
*1 Input Shaft Assembly
*2 Output Shaft Assembly
*3 No. 1 Fork Shaft Assembly
*4 No. 2 Gear Shift Fork Assembly
*5 No. 3 Gear Shift Fork Assembly


Remove the input shaft assembly together with the output shaft assembly, No. 1 fork shaft assembly, No. 2 gear shift fork assembly and No. 3 gear shift fork assembly from the transaxle(MTM) case sub-assembly.

NOTICE:

To prevent damage to the front output shaft bearing (inner race), slightly raise the differential case assembly.



b.

Remove the No. 1 fork shaft assembly, No. 2 gear shift fork assembly and No. 3 gear shift fork assembly from the input shaft assembly and output shaft assembly.


Hide 33232F 22.REMOVE NO. 1 GEAR SHIFT HEAD

a.
C396332

Using a 5 mm pin punch and hammer, remove the shift head set slotted spring pin and No. 1 gear shift head from the No. 1 gear shift fork shaft.


Hide 33210 23.REMOVE NO. 1 GEAR SHIFT FORK ASSEMBLY

a.
C396333

Using a 5 mm pin punch and hammer, remove the shift fork slotted pin and No. 1 gear shift fork assembly from the No. 1 gear shift fork shaft.


Hide 24.REMOVE DIFFERENTIAL CASE ASSEMBLY

a.
C396236C01
0.271,0.365 0.552,0.625 true 0.396,1.729 0.823,0.875 true 1.344,0.594 2.094,0.448 true 0.115,0.281 0.427,0.438 0.313,0.156 10 false *1 0.302,1.76 0.615,1.917 0.313,0.156 10 false *2 2.146,0.344 2.458,0.5 0.313,0.156 10 false *3
*1 Differential Case Assembly
*2 No. 2 Output Shaft Assembly
*3 No. 4 Fork Shaft Assembly


Remove the differential case assembly together with the No. 2 output shaft assembly and No. 4 fork shaft assembly from the transaxle(MTM) case sub-assembly.


b.

Remove the No. 4 fork shaft assembly from the No. 2 output shaft assembly.


Hide 33215B 25.REMOVE NO. 4 GEAR SHIFT FORK

a.
C396334

Remove the bolt and No. 4 gear shift fork from the No. 4 gear shift fork shaft.


Hide 41311E 26.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C396237C01
1.688,0.719 2.208,0.719 false 1.458,2.656 2.01,2.906 true 1.354,2.771 1.917,3.208 true 2.052,2.833 2.365,2.99 0.313,0.156 10 false *1 1.938,3.135 2.25,3.292 0.313,0.156 10 false *2 1.406,0.635 1.865,0.833 0.458,0.198 10 false SST
*1 Front Differential Case Front Tapered Roller Bearing (Outer Race)
*2 Front Differential Oil Baffle


Using SST, remove the front differential case front tapered roller bearing (outer race) from the transaxle(MTM) case sub-assembly.

SST
09308-36010  

NOTICE:
·

Make sure that SST is not hooked on the front differential oil baffle.

·

Do not damage the transaxle(MTM) case sub-assembly.




b.
C396238C01
1.958,2.167 3,1.917 true 2.531,2.5 3,1.917 3,1.917 2.646,1.292 false 0.188,1 0.5,1.156 0.313,0.156 10 false *a 3.104,0.458 3.333,0.646 0.229,0.188 10 false *b 3.052,1.844 3.365,2.063 0.313,0.219 10 false SST
*a Hold
*b Turn


Using SST, remove the front differential case front tapered roller bearing (inner race) from the front differential case sub-assembly.

SST
09950-00020  
09950-00030  
09950-60011  (09951-00500)


Hide 41311F 27.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
C396239C01
1.25,0.719 1.719,0.719 false 1.021,2.76 1.979,2.76 true 1.188,3.125 1.979,2.844 true 0.875,2.677 1.188,2.833 0.313,0.156 10 false *1 1.031,3.052 1.344,3.208 0.313,0.156 10 false *2 1.76,0.635 2.219,0.833 0.458,0.198 10 false SST
*1 Front Differential Case Rear Tapered Roller Bearing (Outer Race)
*2 Front Differential Case Rear Shim


Using SST, remove the front differential case rear tapered roller bearing (outer race) and front differential case rear shim from the manual transmission case.

SST
09308-36010  

NOTICE:

Do not damage the manual transmission case.



b.
C396313C01
1.927,2.042 2.698,1.385 2.698,1.385 2.135,1.438 true 0.156,1.031 0.469,1.188 0.313,0.156 10 false *a 2.906,0.25 3.219,0.406 0.313,0.156 10 false *b 2.74,1.302 3.198,1.5 0.458,0.198 10 false SST
*a Hold
*b Turn


Using SST, remove the front differential case rear tapered roller bearing (inner race) from the front differential case sub-assembly.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60011  (09951-00500)


Hide 33449B 28.REMOVE TRANSMISSION MAGNET

a.
C396314

Remove the transmission magnet from the transaxle(MTM) case sub-assembly.


Hide 33101J 29.REMOVE BREATHER PLUG

a.
C396315

Remove the breather plug from the transaxle(MTM) case sub-assembly.


Hide 33321N 30.REMOVE FRONT OUTPUT SHAFT BEARING (OUTER RACE)

a.
C396316N01
1.031,0.656 1.615,0.656 false 0.74,0.573 1.198,0.771 0.458,0.198 10 false SST

Using SST, remove the front output shaft bearing (outer race) from the transaxle(MTM) case sub-assembly.

SST
09308-00010  

NOTICE:

Do not damage the transaxle(MTM) case sub-assembly.



Hide 33134B 31.REMOVE OUTPUT SHAFT(MTM) COVER

a.
C396317

Remove the output shaft(MTM) cover from the transaxle(MTM) case sub-assembly.


Hide 33139G 32.REMOVE REVERSE GEAR SHAFT COVER

a.
C396318

Remove the reverse gear shaft cover from the transaxle(MTM) case sub-assembly.


Hide 33143C 33.REMOVE FRONT DIFFERENTIAL OIL BAFFLE

a.
C396319

Remove the front differential oil baffle from the transaxle(MTM) case sub-assembly.


Hide 31105D 34.REMOVE FRONT TRANSAXLE CASE OIL SEAL

a.
C396320N01
1.396,1.698 0.542,0.938 0.542,0.938 1.417,0.938 true 0.208,0.833 0.667,1.031 0.458,0.198 10 false SST

Using SST and a hammer, remove the front transaxle case oil seal from the transaxle(MTM) case sub-assembly.

SST
09950-60011  (09951-00360)
09950-70010  (09951-07150)


Hide 43410M 35.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C396321N01
2.354,1.583 2.927,1.75 2.927,1.75 2.292,1.323 true 2.979,1.677 3.385,1.885 0.406,0.208 10 false SST

Using SST and a hammer, remove the front drive shaft oil seal RH from the transaxle(MTM) case sub-assembly.

SST
09950-60011  (09951-00590)
09950-70010  (09951-07200)


Hide 31105C 36.REMOVE TRANSAXLE CASE STRAIGHT PIN

a.
C396322

Remove the 3 transaxle case straight pins from the transaxle(MTM) case sub-assembly.


Hide 33322H 37.REMOVE REAR REVERSE GEAR SHAFT BEARING SHIM

a.
C396323

Remove the rear reverse gear shaft bearing shim from the manual transmission case.


Hide 33311K 38.REMOVE REAR INPUT SHAFT BEARING SHIM

a.
C396324

Remove the rear input shaft bearing shim from the manual transmission case.


Hide 33137 39.REMOVE INPUT SHAFT(MTM) COVER

a.
C396325

Remove the input shaft(MTM) cover from the manual transmission case.


Hide 33124C 40.REMOVE NO. 1 OIL RECEIVER PIPE(MTM)

a.
C396326

Disengage the 2 guides and remove the No. 1 oil receiver pipe(MTM) from the manual transmission case.


Hide 33253 41.REMOVE OUTER NO. 1 SHIFT LEVER

a.
C396327C01
1.625,3.271 1.844,3.271 1.844,3.271 2.896,3.042 true 1.448,3.167 1.76,3.323 0.313,0.156 10 false *a
*a Hole


Using a 5 mm pin punch and hammer, remove the inner shift lever slotted spring pin from the inner No. 1 shift lever.

NOTICE:

Perform this step carefully so that the inner shift lever slotted spring pin does not fly out.


HINT:

When removing the inner shift lever slotted spring pin, align the inner shift lever slotted spring pin with the hole in the neutral position switch.



b.
C396328C01
0.583,1.24 1.042,1.24 false 1.583,1.208 1.99,1.208 true 0.427,1.146 0.74,1.302 0.313,0.156 10 false *1 2.031,1.094 2.25,1.281 0.219,0.188 10 true *2
*1 Outer No. 1 Shift Lever
*2 Inner No. 1 Shift Lever


Remove the outer No. 1 shift lever and inner No. 1 shift lever from the manual transmission case.


Hide 33253H 42.REMOVE OUTER SHIFT LEVER OIL SEAL

a.
C396329C01
2.198,0.625 2.51,0.229 false 2.542,0.115 2.854,0.271 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the outer shift lever oil seal from the manual transmission case.

NOTICE:

Do not damage the manual transmission case.



Hide 33321A 43.REMOVE REAR OUTPUT SHAFT BEARING (OUTER RACE)

a.
C396330C01
0.521,0.344 1.24,0.802 true 1.042,2.76 1.75,2.76 true 1.073,3.115 1.781,2.865 true 0.896,2.677 1.208,2.833 0.313,0.156 10 false *1 0.917,3.042 1.229,3.198 0.313,0.156 10 false *2 0.219,0.25 0.677,0.448 0.458,0.198 10 false SST
*1 Rear Output Shaft Bearing (Outer Race)
*2 Rear Output Shaft Bearing Shim


Using SST, remove the rear output shaft bearing (outer race) and rear output shaft bearing shim from the manual transmission case.

SST
09308-00010  

NOTICE:

Do not damage the manual transmission case.



Hide 43420H 44.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C396331N01
2.01,1.615 1.375,1.083 1.375,1.083 2.083,1.083 true 1.063,0.979 1.521,1.177 0.458,0.198 10 false SST

Using SST and a hammer, remove the front drive shaft oil seal LH from the manual transmission case.

SST
09950-60011  (09951-00620)
09950-70010  (09951-07150)