1.INSPECT REVERSE GEAR THRUST CLEARANCE
2.INSPECT REVERSE GEAR RADIAL CLEARANCE
33322G
3.REMOVE REAR REVERSE GEAR SHAFT BEARING
| *a | Hold |
| *b | Turn |
Using SST, remove the rear reverse gear shaft bearing from the No. 2 output shaft.
Support the No. 2 output shaft by hand to prevent it from dropping.
33327
4.REMOVE NO. 4 TRANSMISSION HUB SLEEVE
Remove the No. 4 transmission hub sleeve from the No. 4 transmission clutch hub.
33331
5.REMOVE REVERSE GEAR
| *1 | No. 4 Transmission Clutch Hub |
| *2 | Reverse Synchronizer Ring |
| *3 | Reverse Gear |
Using SST and a press, remove the No. 4 transmission clutch hub, reverse synchronizer ring and reverse gear from the No. 2 output shaft.
Support the No. 2 output shaft by hand to prevent it from dropping.
33394B
6.REMOVE NO. 3 SYNCHROMESH SHIFTING KEY
| *1 | No. 1 Synchromesh Shifting Key Spring |
| *2 | No. 3 Synchromesh Shifting Key |
Using a screwdriver, remove the 2 No. 1 synchromesh shifting key springs and 3 No. 3 synchromesh shifting keys from the No. 4 transmission clutch hub.
33331A
7.REMOVE REVERSE GEAR BEARING
Remove the reverse gear bearing from the No. 2 output shaft.
33322F
8.REMOVE FRONT REVERSE GEAR SHAFT BEARING
Using SST and a press, remove the front reverse gear shaft bearing from the No. 2 output shaft.
Do not tighten SST excessively.
Support the No. 2 output shaft by hand to prevent it from dropping.