Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › NO. 2 OUTPUT SHAFT
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0371325 NO. 2 OUTPUT SHAFT A

EG62 MANUAL TRANSMISSION / TRANSAXLE  NO. 2 OUTPUT SHAFT  REASSEMBLY  


PROCEDURE

Hide 33322F 1.INSTALL FRONT REVERSE GEAR SHAFT BEARING

a.
C405394C02
2.104,1.125 2.281,1.125 2.281,1.125 2.323,1.385 false 0.885,2.292 0.594,1.677 0.594,1.677 0.927,2.031 false 1.948,1.021 2.26,1.177 0.313,0.156 10 false *a 0.313,1.594 0.729,1.833 0.417,0.24 10 false SST
*a Front Reverse Gear Shaft Bearing Cage


Using SST and a press, install a new front reverse gear shaft bearing to the No. 2 output shaft.

SST
09950-60011  (09951-00360)
09950-70010  (09951-07100)

NOTICE:
·

Be sure to install the front reverse gear shaft bearing in the correct direction.

·

Do not deform the front reverse gear shaft bearing cage.




Hide 33331A 2.INSTALL REVERSE GEAR BEARING

a.
C397253

Coat the reverse gear bearing with gear oil and install it to the No. 2 output shaft.


Hide 33331 3.INSTALL REVERSE GEAR

a.
C397265

Coat the reverse gear with gear oil and install it to the No. 2 output shaft.


Hide 33387A 4.INSTALL REVERSE SYNCHRONIZER RING

a.

Coat the reverse gear cone and reverse synchronizer ring with gear oil.


b.
C397266

Install the reverse synchronizer ring to the reverse gear.


Hide 33394B 5.INSTALL NO. 3 SYNCHROMESH SHIFTING KEY

a.
C397267

Install the 3 No. 3 synchromesh shifting keys to the No. 4 transmission clutch hub with the 2 No. 1 synchromesh shifting key springs.

NOTICE:
·

Be sure to install the 3 No. 3 synchromesh shifting keys in the correct direction.

·

Make sure to position the opening of each No. 1 synchromesh shifting key spring as shown in the illustration.




Hide 33327 6.INSTALL NO. 4 TRANSMISSION HUB SLEEVE

a.

Coat the No. 4 transmission hub sleeve and No. 4 transmission clutch hub with gear oil.


b.
C400497

Install the No. 4 transmission hub sleeve to the No. 4 transmission clutch hub.


Hide 33352B 7.INSTALL NO. 4 TRANSMISSION CLUTCH HUB

a.
C400498N01
0.698,2.75 1.844,3 true 0.302,1.229 0.458,1.354 false 1.896,2.927 2.354,3.125 0.458,0.198 10 false SST 0.021,1.146 0.479,1.344 0.458,0.198 10 false SST

Using SST and a press, install the No. 4 transmission clutch hub together with the No. 4 transmission hub sleeve and 3 No. 3 synchromesh shifting keys to the No. 2 output shaft.

NOTICE:

Align the No. 3 synchromesh shifting keys with the cutouts of the reverse synchronizer ring.


SST
09608-04031  
09950-60011  (09951-00360)


Hide 33322G 8.INSTALL REAR REVERSE GEAR SHAFT BEARING

a.
C405395C02
2.146,1.083 2.302,1.083 2.302,1.083 2.354,1.344 false 0.646,1.365 0.969,1.094 0.969,1.094 0.698,1.625 false 0.656,2.771 1.063,2.938 true 2,0.979 2.313,1.135 0.313,0.156 10 false *a 1.01,1 1.385,1.208 0.375,0.208 10 false SST 1.115,2.844 1.49,3.052 0.375,0.208 10 false SST
*a Rear Reverse Gear Shaft Bearing Cage


Using SST and a press, install a new rear reverse gear shaft bearing to the No. 2 output shaft.

SST
09950-60011  (09951-00350, 09951-00360)
09950-70010  (09951-07100)

NOTICE:
·

Be sure to install the rear reverse gear shaft bearing in the correct direction.

·

Do not deform the rear reverse gear shaft bearing cage.




Hide 10.INSPECT REVERSE GEAR RADIAL CLEARANCE