Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0371327 DIFFERENTIAL CASE A

EG62 MANUAL TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  REASSEMBLY  


PROCEDURE

Hide 41331F 1.INSTALL FRONT DIFFERENTIAL SIDE GEAR

a.
C288461C02
0.771,0.688 0.635,0.302 0.635,0.302 0.552,0.302 false 1.719,0.74 1.583,0.333 1.583,0.333 1.5,0.333 false 2.5,0.708 2.365,0.323 2.365,0.323 2.281,0.323 false 0.406,0.229 0.719,0.385 0.313,0.156 10 false *1 1.323,0.25 1.635,0.406 0.313,0.156 10 false *2 2.104,0.25 2.417,0.406 0.313,0.156 10 false *3
*1 Front Differential Side Gear
*2 Conical Spring Washer
*3 Front No. 1 Differential Side Gear Thrust Washer
V100135

Gear Oil


Coat the 2 front differential side gears, 2 conical spring washers and 2 front No. 1 differential side gear thrust washers with gear oil.


b.
C400512C01
2.177,0.75 2.344,0.75 false 2.198,1.177 2.365,1.24 false 2.177,0.917 2.344,0.917 false 2.188,2.198 2.354,2.198 false 2.188,2.385 2.354,2.385 false 2.188,2 2.365,1.927 false 2.031,1.083 2.344,1.24 0.313,0.156 10 false *1 2.021,0.844 2.333,1 0.313,0.156 10 false *2 2.042,2.292 2.354,2.448 0.313,0.156 10 false *3 2.031,1.906 2.344,2.063 0.313,0.156 10 false *1 2.031,2.115 2.344,2.271 0.313,0.156 10 false *2 2.021,0.656 2.333,0.813 0.313,0.156 10 false *3
*1 Front Differential Side Gear
*2 Conical Spring Washer
*3 Front No. 1 Differential Side Gear Thrust Washer


Install the 2 front differential side gears, 2 front No. 1 differential side gear thrust washers and 2 conical spring washers to the front differential case.

NOTICE:
·

Do not drop the front differential side gear, front No. 1 differential side gear thrust washer or conical spring washer.

·

Make sure that the conical spring washer is installed in the correct direction.




c.

Set SST as shown in the illustration and tighten it.

C400510C01
0.833,0.802 1.583,1.01 true 3.635,0.323 3.948,0.479 0.313,0.156 10 false *a 0.979,2.417 1.292,2.573 0.313,0.156 10 false *b 0.542,0.708 1,0.906 0.458,0.198 10 false SST
*a Turn *b Hold


SST
09528-52010  (09528-05010, 09953-05010)

NOTICE:

Do not overtighten SST, as doing so will damage the front differential side gear, conical spring washer, front No. 1 differential side gear thrust washer and front differential case.


HINT:
·

Tighten SST to create the necessary clearance to install the front differential pinions.

·

When installing the front differential pinions, do not overtighten SST, as it is necessary to rotate the front differential side gears.




d.
C287727C02
0,0 0,0 false
V100135

Gear Oil


Coat the 2 front differential pinions and 2 front differential pinion thrust washers with gear oil.


e.
C400517C01
2.729,2.604 2.729,2.198 true 0.74,3.104 0.74,2.469 true 1.198,3.125 0.917,2.458 true 0.938,1.781 0.479,1.156 true 2.667,2.635 2.979,2.792 0.313,0.156 10 false *1 1.167,3.135 1.479,3.292 0.313,0.156 10 false *2 0.698,3.125 1.01,3.281 0.313,0.156 10 false *3 1.781,0.677 2.094,0.833 0.313,0.156 10 false *a 0.177,1.073 0.635,1.271 0.458,0.198 10 false SST
*1 Front Differential Side Gear
*2 Front Differential Pinion
*3 Front Differential Pinion Thrust Washer
*a Turn


Using SST as shown in the illustration, rotate the front differential side gear and install the 2 front differential pinions and 2 front differential pinion thrust washers.

SST
09528-52010  (09528-05030)

CAUTION:

Be careful not to catch your fingers between the front differential pinion and front differential case.


NOTICE:
·

Be careful not to damage the front differential pinion and front differential pinion thrust washer.

·

Do not drop the front differential pinion or front differential pinion thrust washer.




Hide 2.INSPECT FRONT DIFFERENTIAL PINION BACKLASH

Hide 41342F 3.INSTALL FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C400518C01
0,0 0,0 false
V100135

Gear Oil


Coat the front No. 1 differential pinion shaft with gear oil.


b.

Install the front No. 1 differential pinion shaft to the front differential case sub-assembly so that the hole for the front differential pinion shaft straight pin is aligned with the hole in the front differential case sub-assembly.


Hide 41302F 4.INSPECT FRONT DIFFERENTIAL CASE SUB-ASSEMBLY

Hide 41342A 5.INSTALL FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C400519

Using a 5 mm pin punch and hammer, install the front differential pinion shaft straight pin to the front differential case sub-assembly.


b.
C400520

Using a chisel and hammer, stake the front differential case sub-assembly.


Hide 41221 6.INSTALL FRONT DIFFERENTIAL RING GEAR

a.

Clean the contact surfaces of the front differential case sub-assembly and front differential ring gear.


b.

Using a heater, heat the front differential ring gear to 90 to 100°C (194 to 212°F).


c.
C400521C01
1.906,0.573 0.917,0.396 0.917,0.396 1.917,0.479 true 0.76,0.292 1.073,0.448 0.313,0.156 10 false *a
*a Matchmark


After the moisture on the front differential ring gear has completely evaporated, quickly align the matchmarks on the front differential ring gear and front differential case sub-assembly and install the front differential ring gear to the front differential case sub-assembly.


d.

Install the 12 bolts.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)