G9010A
1.INSTALL RADIATOR ASSEMBLY (for Inverter Coolant)
Attach the 2 claws and install the radiator assembly.
Install the 4 bolts.
| *1 | No. 3 Inverter Cooling Hose |
| *2 | No. 4 Inverter Cooling Hose |
| *a | Alignment Mark (White) |
| *b | Rib |
| *c | 2 to 7 mm (0.0788 to 0.2755 in.) |
| *d | Upper Side |
| *e | LH Side |
Connect the No. 3 inverter cooling hose and No. 4 inverter cooling hose to the radiator assembly and slide the 2 hose clips to secure them.
To prevent foreign matter from entering the radiator assembly and inverter cooling system, do not remove the pieces of cloth from the pipes and disconnected hoses until installation.
Make sure to align the alignment marks of the hoses with the ribs of the radiator assembly.
Make sure that the clips are positioned as shown in the illustration.
53205
2.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
3.ADD COOLANT (for Inverter)
4.INSPECT FOR COOLANT LEAK (for Inverter)