Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0371646 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  INSTALLATION  


PROCEDURE

Hide G923B 1.INSTALL BATTERY COOLING BLOWER BRACKET

a.

Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Engage the clamp.


Hide G9230 2.INSTALL BATTERY COOLING BLOWER ASSEMBLY

a.

Install the battery cooling blower assembly to the HV battery with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




b.

Connect the battery cooling blower assembly connector.


Hide G92D1 3.INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

a.

Install the No. 1 hybrid battery intake duct to the battery cooling blower assembly with the 2 clips.


b.

Engage the 2 clamps.


Hide 71033 4.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

a.
A433772C01
2.198,1.865 2.354,2.063 0.156,0.198 10 true 1 2.667,1.865 2.823,2.063 0.156,0.198 10 true 2 2.74,0.229 2.896,0.427 0.156,0.198 10 true 3 1.146,1.865 1.302,2.063 0.156,0.198 10 true 4 0.667,1.865 0.823,2.063 0.156,0.198 10 true 5 0.583,0.219 0.74,0.417 0.156,0.198 10 true 6
V113147

Install in this Direction


Attach the 2 guides and install the rear seat cushion leg sub-assembly in the direction indicated by the arrow shown in the illustration.


b.

Temporarily install the rear seat cushion leg sub-assembly with the 6 bolts.


c.

Fully tighten the 6 bolts in the order shown in the illustration.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 58464D 5.INSTALL BATTERY SERVICE COVER BOARD

a.

Engage the 2 guides to install the battery service cover board to the rear seat cushion leg sub-assembly.


b.

Engage the 2 clips.


Hide 58466J 6.INSTALL NO. 2 BATTERY SERVICE COVER BOARD

a.

Engage the 5 clips and guide.


b.

Install the No. 2 battery service cover board with the 2 clips.


Hide 67917C 7.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 58467H 8.INSTALL NO. 3 BATTERY SERVICE COVER BOARD

a.

Engage the 5 clips and guide.


b.

Install the No. 3 battery service cover board with the 2 clips.


Hide 67918E 9.INSTALL REAR DOOR SCUFF PLATE LH

Hide 72693 10.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 11.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY