Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM3620E _51 Engine / Hybrid System _076385 M20A-FKS LUBRICATION _0371897 OIL LEVEL SENSOR A

M20A-FKS LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 53895B 1.REMOVE FRONT FENDER SPLASH SHIELD RH

Hide 53896B 2.REMOVE FRONT FENDER SPLASH SHIELD LH

Hide 51410 3.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 89491 7.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the engine oil level sensor connector.


b.
A432705

Remove the clip from the engine oil level sensor.


c.
A432706

Remove the 2 bolts and engine oil level sensor from the stiffening crankcase assembly.