This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
89491
1.INSTALL ENGINE OIL LEVEL SENSOR
Install the engine oil level sensor to the stiffening crankcase assembly with the 2 bolts.
Install a new clip to the engine oil level sensor.
Connect the engine oil level sensor connector.
12101
2.INSTALL OIL PAN SUB-ASSEMBLY
3.ADD ENGINE OIL
4.INSPECT FOR ENGINE OIL LEAK
5.CHECK ENGINE OIL LEVEL
51420
6.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
51410
7.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
53896B
8.INSTALL FRONT FENDER SPLASH SHIELD LH
53895B
9.INSTALL FRONT FENDER SPLASH SHIELD RH