Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › OIL PUMP
RM3620E _51 Engine / Hybrid System _076385 M20A-FKS LUBRICATION _0371898 OIL PUMP A

M20A-FKS LUBRICATION  OIL PUMP  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15100 1.INSTALL OIL PUMP ASSEMBLY

a.

Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


Hide 13620B 2.INSTALL ENGINE BALANCER ASSEMBLY

Hide 89491 3.INSTALL ENGINE OIL LEVEL SENSOR

Hide 15104 4.INSTALL OIL STRAINER SUB-ASSEMBLY