Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › ENGINE OIL COOLER
RM3620E _51 Engine / Hybrid System _076385 M20A-FKS LUBRICATION _0371899 ENGINE OIL COOLER A

M20A-FKS LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 53895B 1.REMOVE FRONT FENDER SPLASH SHIELD RH

Hide 53896B 2.REMOVE FRONT FENDER SPLASH SHIELD LH

Hide 51410 3.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 5.DRAIN ENGINE COOLANT

Hide 15710 7.REMOVE OIL COOLER ASSEMBLY

a.
A432710C01
1.25,0.958 0.854,0.958 true 2.948,1.448 2.813,1.448 2.813,1.448 2.573,1.125 true 0.708,0.875 0.875,1.063 0.167,0.188 10 true *1 3,1.354 3.198,1.542 0.198,0.188 10 true *2
*1 No. 1 Water By-pass Hose
*2 No. 2 Water By-pass Hose


Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the oil cooler assembly.


b.
A433217

Remove the bolt, 2 nuts and oil cooler assembly from the cylinder block sub-assembly.


c.
A426833

Remove the 2 oil cooler gaskets from the oil cooler assembly.


d.
A433218

Remove the oil control valve filter from the cylinder block sub-assembly.