Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › ENGINE OIL COOLER
RM3620E _51 Engine / Hybrid System _076385 M20A-FKS LUBRICATION _0371899 ENGINE OIL COOLER A

M20A-FKS LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install a new oil control valve filter to the cylinder block sub-assembly.


b.

Install 2 new oil cooler gaskets to the oil cooler assembly.


c.

Install the oil cooler assembly to the cylinder block sub-assembly with the 2 nuts and bolt.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


d.

Connect the No. 1 water by-pass hose and No. 2 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.


Hide 3.ADD ENGINE COOLANT

Hide 4.INSPECT FOR COOLANT LEAK

Hide 51420 7.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 51410 8.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 53896B 9.REMOVE FRONT FENDER SPLASH SHIELD LH

Hide 53895B 10.REMOVE FRONT FENDER SPLASH SHIELD RH