F1334
1.INSTALL NO. 1 CONVERTER CONTROL BRACKET
Install the No. 1 converter control bracket to the eco-run vehicle converter assembly with the 2 bolts.
G92C0A
2.INSTALL ECO-RUN VEHICLE CONVERTER ASSEMBLY
Install the eco-run vehicle converter assembly with the 2 nuts.
| *a | Lock Lever |
Connect the connector to the eco-run vehicle converter assembly and move the lock lever to lock the connector.
3.INSTALL FRONT BUMPER ASSEMBLY
for Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Off Road Package)>INSTALLATION
except Off Road Package:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (except Off Road Package)>INSTALLATION
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION