Home › Engine / Hybrid System › STOP AND START › ENGINE STOP AND START SOLENOID FILTER
RM3620E _51 Engine / Hybrid System _076400 STOP AND START _0371974 ENGINE STOP AND START SOLENOID FILTER A

STOP AND START  ENGINE STOP AND START SOLENOID FILTER  INSTALLATION  


PROCEDURE

Hide 8926A 1.INSTALL ENGINE STOP AND START SOLENOID FILTER

a.

for RHD:

i.

Install the engine stop and start solenoid filter with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)



b.

for LHD:

i.

Install the engine stop and start solenoid filter with the bolt.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Connect the connector to the engine stop and start solenoid filter.



Hide 89261A 2.INSTALL ENGINE STOP AND START ECU (for RHD)

Hide 73900 3.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)