89261A
1.INSTALL ENGINE STOP AND START ECU
for RHD:
for Automatic Transaxle:
Install the engine stop and start solenoid filter to the engine stop and start ECU.
Click hereEngine / Hybrid System>STOP AND START>ENGINE STOP AND START SOLENOID FILTER>INSTALLATION
|
Nut |
|
Bolt |
Install the engine stop and start ECU with the bolt and nut.
Connect the 3 connectors to the engine stop and start ECU.
for Automatic Transaxle:
Connect the connector to the engine stop and start solenoid filter.
Connect the 5 connectors.
Attach the 2 clamps and connect the 4 connectors.
for LHD:
|
Nut (A) |
|
Nut (B) |
Install the engine stop and start ECU with the 2 nuts.
Attach the clamp and connect the wire harness to the engine stop and start ECU.
Connect the 3 connectors to the engine stop and start ECU.
for Automatic Transaxle:
Install the engine stop and start solenoid filter.
Click hereEngine / Hybrid System>STOP AND START>ENGINE STOP AND START SOLENOID FILTER>INSTALLATION
2.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)
55607
3.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
62112
4.INSTALL COWL SIDE TRIM BOARD LH (for RHD)
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
67914B
5.INSTALL FRONT DOOR SCUFF PLATE LH (for RHD)
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
62312B
6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for RHD)
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
58810J
7.INSTALL CONSOLE BOX ASSEMBLY (for RHD)
73900
8.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
10.PERFORM REGISTRATION
for A25A-FKS:
Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM (for A25A-FKS)>REGISTRATION
for M20A-FKS:
Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM(for M20A-FKS)>REGISTRATION