1.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
71611
3.REMOVE REAR SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
Detach the hook.
for Gasoline Model:
for HV Model:
Disconnect the 3 connectors.
Detach the clamp and claw.
Using a thin-bladed screwdriver, detach the hook to remove the rear seat cushion pad (occupant detection sensor) from the bench type rear seat cushion cover as shown in the illustration.
|
Protective Tape | - | - |
Do not dirty or damage the bench type rear seat cushion cover.
Tape the thin-bladed screwdriver tip before use.