Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM3620E _58 Vehicle Interior _076405 SEAT _0372018 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
B521792

·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



PROCEDURE

Hide 1.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

a.

for Gasoline Model:

i.

Place your hand in the position beside the hook as shown in the illustration and lift the front end of bench type rear seat cushion assembly in the removal direction to detach the cushion wire on the front of bench type rear seat cushion assembly from the rear seat cushion lock hook.

NOTICE:
·

Be sure to detach the hook on the front of bench type rear seat cushion assembly one at a time.

·

If the hook on the front of bench type rear seat cushion assembly is detached, replace the rear seat cushion lock hook with a new one.

·

Be sure to hold the parts of the bench type rear seat cushion assembly directly next to the bench type rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.



B566695C02
0.802,2.042 0.969,2.25 0.167,0.208 10 true A 0.552,2.448 0.719,2.656 0.167,0.208 10 true B 1.583,1.917 1.75,2.125 0.167,0.208 10 true C 2.167,1.927 2.333,2.135 0.167,0.208 10 true C 1.573,1.563 1.698,1.76 0.125,0.198 10 true D
V113146

Place Hand Here
V113147

Remove in this Direction


Dimensions:
Area Measurement Area Measurement
A 30 mm (1.18 in.) B 60 mm (2.36 in.)
C 80 mm (3.15 in.) D 18 mm (0.71 in.)




b.

for HV Model:

i.

Place your hand in the position beside the hook as shown in the illustration and lift the front end of bench type rear seat cushion assembly in the removal direction to detach the cushion wire on the front of bench type rear seat cushion assembly from the rear seat cushion lock hook.

NOTICE:
·

Be sure to detach the hook on the front of bench type rear seat cushion assembly one at a time.

·

If the hook on the front of bench type rear seat cushion assembly is detached, replace the rear seat cushion lock hook with a new one.

·

Be sure to hold the parts of the bench type rear seat cushion assembly directly next to the bench type rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.



B556331C01
1.219,2.125 1.375,2.323 0.156,0.198 10 true A 0.49,2.521 0.646,2.719 0.156,0.198 10 true B 1.833,1.969 2,2.135 0.167,0.167 10 true C 2.427,1.969 2.594,2.135 0.167,0.167 10 true C 1.563,1.698 1.729,1.865 0.167,0.167 10 true D
V113146

Place Hand Here
V113147

Remove in this Direction


Dimensions:
Area Measurement Area Measurement
A 30 mm (1.18 in.) B 60 mm (2.36 in.)
C 80 mm (3.15 in.) D 160 mm (6.30 in.)



ii.
B558403C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand in the position shown in the illustration and pull in the removal direction to detach the cushion wire on the rear end of bench type rear seat cushion assembly.


iii.

Remove the bench type rear seat cushion assembly.

NOTICE:

Be careful not to damage the bench type rear seat cushion assembly, body exterior or interior parts.




c.
B521805C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand in the position shown in the illustration and pull in the removal direction to detach the hook on the rear end of bench type rear seat cushion assembly.


d.

w/ Occupant Detection Sensor:

i.
B521807C01
0.365,0.333 0.604,0.563 0.24,0.229 12 true *B 1.135,0.5 1.375,0.729 0.24,0.229 12 true *A 2,0.292 2.24,0.521 0.24,0.229 12 true *A 2.365,0.104 2.604,0.333 0.24,0.229 12 true *A 3.125,0.323 3.365,0.552 0.24,0.229 12 true *B 0.688,0.365 0.927,0.594 0.24,0.229 12 true *B 2.656,0.198 2.896,0.427 0.24,0.229 12 true *B
*A w/ Occupant Detection Sensor
*B w/ Seat Heater System


Disconnect the 3 connectors for occupant detection sensor.



e.

w/ Seat Heater System:

i.

Disconnect the 4 connectors for seat heater.



f.

Remove the bench type rear seat cushion assembly.

NOTICE:

Be careful not to damage the bench type rear seat cushion assembly, body exterior or interior parts.



Hide 72693 2.REMOVE REAR SEAT CUSHION LOCK HOOK

NOTICE:
·

If the hook on the front of the bench type rear seat cushion assembly is detached, replace the rear seat cushion lock hook with a new one.

·

Do not reuse the removed rear seat cushion lock hook.



HINT:

Use the same procedure for the 2 parts.


a.
B372780C09
2.25,2.344 1.958,2.073 1.958,2.073 1.729,2.073 true 2.417,2.677 2.146,2.885 2.146,2.885 1.854,2.885 true 1.563,1.979 1.875,2.177 0.313,0.198 10 false *a 1.656,2.792 1.969,2.99 0.313,0.198 10 false *b
*a Body
*b Sleeve


Insert 2 thin-bladed screwdrivers between the rear seat cushion lock hook sleeve and body as shown in the illustration.


b.

Pull up the 2 thin-bladed screwdrivers to detach the claw and remove the rear seat cushion lock hook.


Hide 3.REMOVE REAR SEATBACK ASSEMBLY LH

a.
B521811

Detach the clip.


b.

w/ Seat Heater System:

i.
B521810

Detach the clamp.



c.
B521813

Fold the rear seatback assembly LH forward.

NOTICE:

When folding down the rear seatback assembly LH make sure that the rear seatback assembly LH does not contact the body.



d.

Remove the 2 bolts.


e.
B521814

Detach the guide and remove the rear seatback assembly LH.

NOTICE:

Be careful not to damage the rear seatback assembly LH, body exterior or interior parts.



Hide 73350C 4.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)

Hide 5.REMOVE REAR SEATBACK ASSEMBLY RH

a.
B521812

Detach the clip.


b.

w/ Seat Heater System:

i.
B521809

Detach the clamp.



c.
B521816

Fold the rear seatback assembly RH forward.

NOTICE:

When folding down the rear seatback assembly RH make sure that the rear seatback assembly RH does not contact the body.



d.

Remove the 2 bolts.


e.
B521817

Detach the guide and remove the rear seatback assembly RH.

NOTICE:

Be careful not to damage the rear seatback assembly RH, body exterior or interior parts.



Hide 71305A 6.REMOVE REAR CENTER SEATBACK HINGE SUB-ASSEMBLY

HINT:

Perform this procedure when replacing the rear center seatback hinge sub-assembly.


a.
B521818

Remove the 2 bolts and rear center seatback hinge sub-assembly.


Hide 71304C 7.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

HINT:

Perform this procedure when replacing the rear seatback hinge sub-assembly LH.


a.
B521819

Remove the 2 bolts and rear seatback hinge sub-assembly LH.


Hide 71303C 8.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

HINT:
·

Perform this procedure when replacing the rear seatback hinge sub-assembly RH.

·

Use the same procedure described for the LH side.



Hide 67918E 9.REMOVE REAR DOOR SCUFF PLATE LH (for HV Model)

HINT:

Perform this procedure when replacing the rear seat cushion leg sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


Hide 67917C 10.REMOVE REAR DOOR SCUFF PLATE RH (for HV Model)

HINT:
·

Perform this procedure when replacing the rear seat cushion leg sub-assembly.

·

Use the same procedure described for the LH side.



Hide 58467H 11.REMOVE NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)

HINT:

Perform this procedure when replacing the rear seat cushion leg sub-assembly.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>REMOVAL


Hide 58466J 12.REMOVE NO. 2 BATTERY SERVICE COVER BOARD (for HV Model)

HINT:

Perform this procedure when replacing the rear seat cushion leg sub-assembly.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>REMOVAL


Hide 58464D 13.REMOVE BATTERY SERVICE COVER BOARD (for HV Model)

HINT:

Perform this procedure when replacing the rear seat cushion leg sub-assembly.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>REMOVAL


Hide 71033 14.REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY (for HV Model)

HINT:

Perform this procedure when replacing the rear seat cushion leg sub-assembly.


a.
A430768C02
0,0 0,0 false
V113147

Remove in this Direction


Remove the 6 bolts.


b.

Detach the guide and remove the rear seat cushion leg sub-assembly.