Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › EGR COOLER
RM3620E _51 Engine / Hybrid System _076503 A25A-FXS EMISSION CONTROL _0372417 EGR COOLER A

A25A-FXS EMISSION CONTROL  EGR COOLER  INSTALLATION  


PROCEDURE

Hide 25680 1.INSTALL EGR COOLER ASSEMBLY

a.
A405774C01
0.792,1.333 0.396,1.208 0.396,1.208 0.865,1.146 false 0.865,1.781 0.396,1.854 0.396,1.854 0.802,1.604 false 0.208,1.125 0.469,1.333 0.26,0.208 10 false *a 0.188,1.771 0.448,1.979 0.26,0.208 10 false *a
*a Claw


Install a new EGR cooler gasket to the EGR cooler assembly.

NOTICE:

Make sure that the claws of the EGR cooler gasket are toward the EGR cooler assembly side.



b.
A405773C01
1.896,0.844 2,0.438 2,0.438 2.135,0.438 true 1.406,1.219 1.302,1.083 1.302,1.083 1.135,1.083 true 1.521,1.406 2.021,1.677 2.021,1.677 1.948,1.042 true 0.958,0.99 1.167,1.188 0.208,0.198 10 true *a 2.177,0.354 2.385,0.552 0.208,0.198 10 true *a 1.948,1.698 2.156,1.896 0.208,0.198 10 true *a
*a Claw


Install a new EGR valve gasket to the EGR valve assembly.

NOTICE:

Make sure that the claws of the EGR valve gasket are toward the EGR valve assembly side.



c.
A405772N01
2.74,1.302 2.896,1.49 0.156,0.188 10 true A 2.292,1.99 2.458,2.135 0.167,0.146 10 true A 1.365,1.698 1.5,1.854 0.135,0.156 10 true A 1.656,0.719 1.792,0.875 0.135,0.156 10 true B 0.656,1.146 0.792,1.302 0.135,0.156 10 true B

Temporarily install the EGR cooler assembly to the cylinder head sub-assembly and EGR valve assembly with the 5 bolts.


d.

Tighten the 3 bolts (A).

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


e.

Tighten the 2 bolts (B).

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


f.

Connect the No. 3 water by-pass hose and No. 4 water by-pass hose to the EGR cooler assembly and slide the 2 clips to secure them.


Hide 3.ADD ENGINE COOLANT (for Engine)

Hide 4.INSPECT FOR COOLANT LEAK (for Engine)