1.SECURE VEHICLE
Fully apply the parking brake and chock a wheel.
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
58810J
2.REMOVE CONSOLE BOX ASSEMBLY
58861B
3.REMOVE NO. 1 CONSOLE BOX DUCT
Remove the clip from the No. 1 console box duct.
Disconnect the wire harness clamp from the No. 1 console box duct
33820B
4.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
| *1 | Select Control Cable |
| *2 | Shift Control Cable |
|
Push the ends of the clip apart |
Remove the clip and disconnect the cable end of the select control cable from the floor shift shift lever assembly.
Push the ends of the clip apart, and then disconnect the shift control cable from the floor shift shift control cable assembly.
|
Pull Out |
Pull out the cable locks of the shift control cable and select control cable.
|
Turn approximately 180° |
|
Remove |
Rotate the nut clockwise approximately 180° and, while holding the nut in that position, disconnect the shift control cable and select control cable from the floor shift shift lever assembly.
Do not over-rotate the cable lock as it will come off the internal spring and the transmission control cable assembly will not be reusable.
Remove the shift control cable from the floor shift lever assembly while holding the lock nut.
33530F
5.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY
Detach the wire harness clamp.
Remove the 4 bolts and floor shift shift lever assembly.