Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT (for Front Side)
RM3620E _51 Engine / Hybrid System _076384 M20A-FKS ENGINE CONTROL _0372632 ACTIVE CONTROL ENGINE MOUNT(for Front Side) A

M20A-FKS ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT(for Front Side)  INSTALLATION  


PROCEDURE

Hide 12361A 1.INSTALL FRONT ENGINE MOUNTING INSULATOR

a.

Install the front engine mounting insulator to the front frame assembly with the 3 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


b.
A433249N01
0.917,1.021 1.073,1.219 0.156,0.198 10 true C 2.49,0.688 2.646,0.885 0.156,0.198 10 true B 0.729,0.156 0.885,0.354 0.156,0.198 10 true A 1.646,1.802 1.802,2 0.156,0.198 10 true D

Install the front engine mounting bracket to the transaxle housing with the 3 bolts.

Torque:
Bolt (A), (B) and (C) : 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Temporarily tighten the bolt (A), and then install the 3 bolts in the order of (B), (C) and (A).



c.

Install the front engine mounting bracket to the front engine mounting insulator with the bolt.

Torque:
Bolt (D) : 72 N*m (734 kgf*cm, 53 ft.*lbf)


d.

Connect the vacuum hose to the front engine mounting insulator.


e.

Attach the 6 clamps and install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51420 2.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 53896B 4.INSTALL FRONT FENDER SPLASH SHIELD LH

Hide 53895B 5.INSTALL FRONT FENDER SPLASH SHIELD RH

Hide 17650H 6.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)