Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373068 CAMSHAFT OIL CONTROL SOLENOID A

A25A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 15370 3.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

a.
A402349

Disconnect the cam timing oil control solenoid assembly connector.


b.

Remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.

NOTICE:

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.



c.
A401879

Remove the O-ring from the cam timing oil control solenoid assembly.

NOTICE:
·

When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.

·

If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.



HINT:

Perform this procedure only when replacement of the O-ring is necessary.