Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373071 VACUUM SWITCHING VALVE(for Engine Mounting) A

A25A-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  INSTALLATION  


PROCEDURE

Hide 17650H 1.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.

Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).


c.

Attach the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.


d.

Install the wire harness clamp bracket to the transmission case side cover with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Attach the 2 wire harness clamps and install the engine wire with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 2.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17750A 3.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY