Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT (for Front Side)
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373072 ACTIVE CONTROL ENGINE MOUNT(for Front Side) A

A25A-FKS ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT(for Front Side)  INSTALLATION  


PROCEDURE

Hide 12361 1.INSTALL FRONT ENGINE MOUNTING INSULATOR

a.

Install the stay to the front engine mounting insulator with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Install the front engine mounting insulator to the front frame assembly with the 3 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


c.
A432645N02
0.802,1.052 0.958,1.25 0.156,0.198 10 true C 2.448,1.271 2.604,1.469 0.156,0.198 10 true B 0.552,0.479 0.708,0.656 0.156,0.177 10 true A 1.74,1.906 1.885,2.094 0.146,0.188 10 true D

Install the front engine mounting bracket to the transaxle housing with the 3 bolts.

Torque:
Bolt (A), (B) and (C) : 42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Temporarily install the bolt (A), and then tighten the 3 bolts in the order of (B), (C) and (A).



d.

Install the front engine mounting bracket to the front engine mounting insulator with the bolt (D).

Torque:
Bolt (D) : 72 N*m (734 kgf*cm, 53 ft.*lbf)


e.

Connect the vacuum hose to the front engine mounting insulator.


f.

Attach the 2 clamps to connect the vacuum hoses to the front engine mounting insulator.


g.

Install the No. 1 radiator bracket to the front engine mounting bracket with the bolt.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


h.

Attach the 4 clamps to install the radiator hose, vacuum hoses and No. 2 engine wire to the No. 1 radiator bracket.


Hide 51420 2.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 17650H 4.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

Hide 53896B 5.INSTALL FRONT FENDER SPLASH SHIELD LH

Hide 53895B 6.INSTALL FRONT FENDER SPLASH SHIELD RH