Home › Engine / Hybrid System › A25A-FXS (FUEL) › FUEL PUMP (w/o Canister Pump Module)
RM3620E _51 Engine / Hybrid System _076684 A25A-FXS FUEL _0373225 FUEL PUMP(w/o Canister Pump Module) A

A25A-FXS FUEL  FUEL PUMP(w/o Canister Pump Module)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

Click hereEngine / Hybrid System>A25A-FXS (FUEL)>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 23221 2.REMOVE FUEL PUMP

a.
A433824

Detach the 4 claws and disconnect the sub-assembly support from the fuel sub-tank sub-assembly.


b.
A433825

Disconnect the connector from the fuel pump.


c.
A433826

Detach the 3 claws and remove the No. 1 cap from the sub-assembly support.


d.
A434639

Remove the fuel pump from the sub-assembly support.


e.
A433828

Remove the O-ring from the fuel pump.